CHEMCLEAN #711 BA BUFFING COMPOUND REMOVER
CHEMCLEAN #711 BA was especially formulated for the removal of buffing and polishing compounds, rouges, tripoli, oils, greases, etc., from ALL METAL SURFACES in a tank or ultrasonic unit.
BUFFING COMPOUND REMOVER
WHAT IT DOES:
#711 BA was especially formulated for the removal of buffing and polishing compounds, rouges, tripoli, oils, greases, etc., from ALL METAL SURFACES in a tank or ultrasonic unit.
Chemclean #711 BA will not tarnish or discolor aluminum, copper, brass, or bronze.
It will not ATTACK OR ETCH white or slush metals
WHAT IT IS:
Chemclean # 7ll BA is a complex blend of wetting agents, penetrating, and dispersing agents. It is a tan to brown honey-like liquid, readily soluble in cold or hot water. Chemclean #711 BA is mildly alkaline in nature and has no flashpoint.
HOW TO USE IT:
For Tank Installations: Use 4-8 oz. of #711 BA per gallon of water at a temperature of 160° - 210°. Most buffing soils are readily removed with a 3-10 minute soak. Rinse thoroughly with hot or cold water. Most metals may be left in the hot solution for prolonged periods WITHOUT DAMAGE TO THE SURFACE FINISH For Ultrasonic Unite: Use 1-4 oz. of #711 BA per gallon of water. Stir thoroughly and allow the unit to run for about 5 minutes before immersing parts to be cleaned. Rinse thoroughly with hot or cold water.
CAUTION
#711 BA Avoid contact with skin or personal clothing. If skin is contacted, flush with water and neutralize with soap or bicarbonate solution. For eye contact, flush with copious amounts of water - seek medical attention. Allways wear proper protective clothing. SEE MSDS FOR FULL CAUTION.