CHEM SOLVE DEGREASING SOLVENT

CHEM SOLVE is a blend of chlorinated and non-chlorinated hydrocarbon solvents. A superior degreasing solvent, used for the fast, efficient removal of oil, grease, protective coatings, waxy deposits and machinery lubricants safely from all metal surfaces.

WHAT IT DOES:

CHEMSOLVE is a superior degreasing solvent, used for the fast, efficient removal of oil, grease, protective coatings, waxy deposits and machinery lubricants safely from all metal surfaces. Non-corrosive to light metal alloys or plated finishes. CHEMSOLVE has a controlled evaporation rate with no residue. Can be used where you can't wash or rinse with water.

WHAT IT IS:

A blend of chlorinated and non-chlorinated hydrocarbon solvents. Meets MIL-S-18718 (1) (AER). CHEMSOLVE has no initial flash point; after approximately 35% evaporation has a flash point of 160 F.

HOW TO USE IT:

Apply with rag, brush or coarse spray. Wipe off with clean wiping cloth and allow to dry. May be used for cold tank degreasing or in two (2) tank dip operation for economy and extra cleanliness.

Do not use on operating electrical equipment!-

Safe on all metals, insulation, rubber and plastic when wiped, brushed or sprayed on. Usually safe for normal short term immersion. Test paint elastomers or insulation before using for immersion.

CAUTION:

Strong Acid Mixture ... Strong Acid Mixture...Personnel handling and using Prep Kleen should wear proper acid proof clothing and gloves. Eye protection is required. Avoid contact with skin, eyes or clothing. See Material Safety Data Sheet for detailed directions.